centered image

centered image

How Not to Blow a Vein in 20 Useful Tips

Discussion in 'Nursing' started by Riham, Jun 9, 2016.

  1. Riham

    Riham Bronze Member

    Joined:
    Jan 13, 2016
    Messages:
    831
    Likes Received:
    80
    Trophy Points:
    1,350
    Gender:
    Female
    Practicing medicine in:
    Egypt

    99ae751bb32ac843a1836142f2f36b87.jpg

    Whether you are starting an IV line or doing blood extractions, blowing a vein should be the last thing in your mind. A “venous blow” basically means the IV needle goes in ‘too deep,’ puncturing the vein on both sides and potentially leading to infiltration or extravasation.

    A blown vein not only causes patient discomfort, but also the disruption of a nurse’s productivity. This guide details everything a nurse needs to know to prevent blown veins and ensure IV insertion success.

    Why Do Veins Blow?

    There are many possible causes why veins blow during a routine IV catheter insertion. Here’s a list of the possible reasons:

    Fragile Veins.

    Some people are born with weak vein walls. There are also some specific age groups that are more prone to developing fragile veins. Geriatric patients, for example, normally have weak vein walls due to age-related degeneration of connective tissues. Pediatric patients may also have weak vein walls as their veins are still too small.

    Movable Veins.

    There are some veins that are highly movable, especially when you try to puncture them. Usually, the cephalic vein is the most movable one that you will encounter. The dorsal venous network on the hands of most geriatric patients is also thick and movable.

    Catheter that is Too Large.

    A large bore catheter used on a small vein will cause vein collapse. It is important to properly assess first if the IV catheter that you want to use is suitable for the patient’s vein.

    Are you ready to practice your venipuncture skills? Below is a list of the 20 most useful tips so you can avoid blowing a vein.

    1. Feel the Veins.

    You can’t easily see a good vein but you will definitely feel it by palpating the area. Feel for fullness and integrity. Choose the largest vein first as you will less likely blow it especially if you are using a large bore catheter.

    2. Choose the right size of catheter and if not contraindicated, go for a small one.

    If you don’t need to infuse large volumes of fluid or if blood transfusion is not necessary, just use a small catheter. For adult patients, gauge 22 is usually recommended. On the other hand, gauge 22-26 IV catheters are commonly used for pediatric patients.

    3. Make sure that the bevel is facing upwards so you will not blow the vein when advancing forward.

    You can control the angle of insertion more when the bevel is facing upwards. You will also have easier glided point of entry as the sharp end-tip of the needle enters the skin.


    def173f25408aa15c104fa08fbe91dba.jpg


    Hold the syringe horizontally, and position the bevel of the needle so the point of the needle is facing up. Via Drugs.com

    4. For geriatric patients, a deeper vein is less prone to blowing.

    Elderly patients usually have fragile veins like those thick veins that could be easily seen in the dorsal part of the hands. If you know that you are dealing with a fragile vein on an elderly patient, look for deeper veins that are more stabilized and less movable.

    5. Always go for the straightest vein.

    Venous valves are often located between the intersection of two veins and you should avoid them for a smooth IV line insertion. If you encounter venous valves upon catheter insertion, it will stop the needle from advancing forward and you might puncture the vein wall sideways.

    6. Use hot packs if your patient’s arms are cold.

    If your patient’s arms are cold, you need to warm them up to dilate the blood vessels. By doing this, you can make veins pop out quickly and avoid blowing them. You can use warm washcloths or blanket if you don’t have hot packs in your area.

    7. Ask your patient to open and close his/her fist during vein assessment.

    This will improve venous refill especially if the arm is dangling downward. Also, when you are about to do venipuncture, make sure to ask the patient to keep his/her hands and arms relaxed. Improving venous refill will enable you to see the veins clearly and assess which vein is more prone to blowing.

    8. Anchor the vein.

    You can do this by holding the skin and veins taut with your non-dominant hand. With this technique, you can keep a unstable vein from moving sideways as you puncture it.

    [​IMG]

    9. When you are about to stick the needle, do it in a 15 to 30 degreeangle.

    Adjust your angle of approach accordingly if your target vein is too shallow or too deep. The common cause of blown veins is too deep angle of approach when sticking the needle.

    18bfe6fdfaf5fc766f106da67cec4ce6.gif
    Image shows the proper initial insertion angle for short peripheral IV catheters. Insert the catheter into the vein at a 15 to 30 angle. Source: spanamerica.com

    10. Insert the catheter directly on top of the vein.

    Avoid side access as it can push the vein sideways even if it’s anchored by your non-dominant hand. Inserting the vein catheter on top of the vein will also reduce the chances of going through the two vein walls.

    11. Go slowly with catheter insertion to avoid double penetration.

    Give yourself plenty of time in estimating the angle of approach so you can avoid jerky movements. Hit the vein slowly but steadily and make a short stroke through the skin to reach the vein quickly. Feel the catheter penetrate the vein. In some cases, you can even hear a small click-like sound and feel that you are getting a flashback.

    12. Once you hit the vein and see flashback of blood in the flashback chamber, STOP advancing the catheter and drop your angle of approach.1

    This is necessary in avoiding puncturing the vein wall again. Drop your angle of approach as you advance the catheter a little bit more. This will prevent puncturing through the vein.

    13. Pull back the needle a little bit before advancing the whole catheter.

    The needle will serve as a guide wire as you push the catheter farther. You need to pull back the needle so there will be less chances of puncturing the vein again as you advance the catheter.

    14. Try not to use a tourniquet in elderly patients.

    Their veins are so thick but very fragile so just a little pressure from the tourniquet can blow a punctured vein. If you suspect that there is poor vein integrity but you can easily see and feel the vein on an elderly patient, try anchoring the vein and do not use a tourniquet.

    However, if you can’t really palpate the vein, you can also try applying a tourniquet a little farther from your target vein.


    15. Improve the vein’s fullness by using gravity.

    Ask the patient to let his or her arms dangle on the side of the bed. The gravity will improve the vein’s fullness so you can palpate it more easily for venipuncture.1

    838584768c844a4685af9b6ac6430daf.jpg

    16. If you are dealing with very fragile veins of elderly and chemo patients, try using a BP cuff as your tourniquet.

    With a BP cuff, you can control the pressure you want to apply. Start with the lowest pressure first and see if you can already make the veins appear. It is best to use the lowest pressure possible so you can prevent pressure-related venous blow.



    17. Once you have a flashback, release the tourniquet first before advancing the catheter.

    This is important in reducing the chances of pressure-related blowing of fragile veins. This trick works for large but weak vein walls. You must be quick in releasing the tourniquet once you have ensured that the catheter is within the vein.



    18. When you have successfully inserted the catheter, pull back the needle quickly to attach the IV fluid set and start the IV infusion with the first few drops running very slowly.

    Rushing into starting the IV fluid might blow the vein wall due to a sudden large volume of fluid being infused. Just let the IV infusion start slowly especially if you are working with fragile veins.
    [​IMG]


    19. Don’t do “fishing”.

    If you don’t get a flashback, don’t make your needle go around digging for the vein. It’s very uncomfortable for the patient and you are also increasing the chances of blowing the vein.

    Whenever you don’t get a flashback, just pull back the needle a little bit and redirect it. If you still don’t get a flashback, pull the needle out and start again.



    20. If available, use visualization devices.

    This is a great help for patients with difficult veins so you could not risk blowing a good venous access. There are many types of vein visualization devices around like transilluminator lights and pocket ultrasound machines. These devices will illuminate vein pathways so you can track the direction of where you should insert your IV catheter.


    One More Tip!
    As what most senior nurses say, once in a while you will experience a “dry spell” with venipunctures. If it’s not your day, let it go and ask help from your colleagues.

    You can also learn hard-to-explain IV insertion techniques by watching senior nurses do venipuncture. Always remember that there are lots of lessons to learn from other’s experiences!


    Source
     

    Add Reply

Share This Page

<